SUBSIDIARY SETTINGS EN 59

VIDEO IN/OUT

8MONITOR TYPE — 4:3LB / 4:3PS / 16:9AUTO / 16:9FIX

You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. For details, refer to “Monitor Set (DVD Deck Only)” ( pg. 19).

8FRONT AUX F-1 — VIDEO / S-VIDEO

Select the appropriate mode depending on the connector (F-1) being used on the front panel.

VIDEO: To use the [VIDEO IN F-1] connector on the front panel.

S-VIDEO: To use the [S-VIDEO IN F-1] input connector on the front panel.

NOTE:

This setting is also applied to the VCR deck.

8REAR AUX L-1 — VIDEO / S-VIDEO

Select the appropriate mode depending on the connector (L-1) being used on the rear panel.

VIDEO: To use the [VIDEO INPUT] connector on the rear panel.

S-VIDEO: To use the [S-VIDEO INPUT] connector on the rear panel.

NOTE:

This setting is also applied to the VCR deck.

DISPLAY SET

8SUPERIMPOSE — OFF / AUTO

When this function is set to “AUTO”, various operational indicators appear on the TV screen.

OFF: To turn off superimposed indications.

AUTO: To superimpose operational indications for approximately five seconds just after the corresponding operation.

NOTES:

●Even when “SUPERIMPOSE” is set to “OFF”, you can display the various operational indicators by pressing ON SCREEN. To clear the operational indicators, press ON SCREEN again.

●When you use this unit as the source player for editing, be sure to set “SUPERIMPOSE” to “OFF” before starting. ( pg. 53)

●When you select “AUTO”, during playback, the operation mode indicators may be disturbed depending on the type of disc being used.

8GRAY BACK — OFF / ON

When this function is set to “ON”, the TV screen becomes all gray when there is no signal input from the external input.

NOTE:

When you want to receive an unstable external input with poor signals, set this function to “OFF”.

RECORDING SET

8SAVE AS LIBRARY — OFF / ON

When this function is set to “ON”, the recording information is automatically stored in the library. For details, refer to “Edit Library Information” ( pg. 44).

8XP MODE REC AUDIO — DOLBY DIGITAL / LINEAR PCM

You can select the audio format when you record a program in XP mode. When this function is set to “LINEAR PCM”, you can obtain a high-quality audio sound.

DOLBY DIGITAL: To record in Dolby Digital format.

LINEAR PCM: To record in Linear PCM format.

8DV AUTO CHAPTER — OFF / ON

When this function is set to “ON”, you can create chapters (marks) when dubbing via the DV input terminal connecting the external DV camcorder.

8DIMMER — BRIGHT / DIM

You can change the brightness of the front display panel. BRIGHT: Normally select this.

DIM: To dim the front display panel.

8POWER SAVE — OFF / ON

When this function is set to “ON”, you can reduce the power consumption while the unit is turned off.

NOTES:

●During Power Save mode, it is not possible to engage the Tray Lock function. ( pg. 65)

●It takes some time for the unit to complete initialization after you turn on unit power, with “WAKE UP” blinking on the front display panel.

●When “POWER SAVE” is set to “OFF”, the cooling fan on the rear of the unit may be activated even if the unit is turned off.

8ON SCREEN LANGUAGE

This unit offers you the choice to view on screen messages in 3 different languages.

For details, refer to “On-screen Language Set” ( pg. 18).

OTHERS

8RESUME — OFF / ON / DISC RESUME

When this function is set to “ON” or “DISC RESUME”, you can use the resume function. ( pg. 22)

OFF: You cannot use the resume function.

ON: You can start playback from the resume point of the placed disc.

DISC RESUME: The unit retains a memory of the resume points of the last 30 discs played back, even though they have been ejected.

NOTE:

“DISC RESUME” setting works on DVD VIDEO, VCD and already finalized DVD-R/DVD-RW (video mode) discs. For other types of discs, the function under “ON” setting will be applied even if “RESUME” is set to “DISC RESUME”.