|
| Disc Dubbing (From DVD To VCR) | 1 Load a disc you want to dub on the DVD deck, and a cassette | |
|
| |||
|
| with the record safety tab intact on the VCR deck. | ||
|
|
| 2 Press VCR/DVD repeatedly so that the VCR lamp lights up on | |
Dubbing An Entire Disc | ||||
the unit. |
Because this unit includes both DVD deck and VCR deck, you can easily use this unit for dubbing without connecting any other equipment.
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/CABLE/DBS/DVD switch to DVD.
VCR/DVD | VCR } DVD |
DUBB. Lamp | 8 | DUBB. | ||
VCR/DVD |
|
|
|
|
1 | 2 | 3 |
|
|
4 | 5 | 6 |
|
|
7 | 8 | 9 |
|
|
| 0 |
|
|
|
3 Press REC MODE repeatedly to set the recording mode. ( pg. 36)
4Press VCR}DVD to select the dubbing direction. The dubbing (DUBB.) lamp lights up on the unit.
5Press and hold DUBB. for more than 2 seconds to start the dubbing. The dubbing (DUBB.) lamp blinks on the unit.
● If the tape has not been rewound, the VCR deck rewinds the tape automatically. When the VCR deck has finished rewinding, dubbing begins automatically.
● After dubbing is completed, the VCR deck rewinds the tape automatically. Press VCR}DVD to turn off the dubbing (DUBB.) lamp.
● To stop dubbing, press 8.
NOTES:
●It is not possible to start dubbing if the unit retains a memory of the resume points. Press 8 twice to clear the resume points.
●There may be a discrepancy of several seconds between where you intend dubbing to start, and where it actually starts.
●If you do not want the superimposed indication to be recorded, set “SUPERIMPOSE” to “OFF” before dubbing. ( pg. 59)
●When the end of the tape is reached during dubbing, the tape is ejected and both deck stops.
●It may be impossible to dub a
●It is not possible to perform other operations like Live Memory Playback. Check the recorded program on the disc after dubbing.
8
REC MODE