GE 60-875 manual Canceling and Preventing Accidental Alarms, Panel Indicator Lights, Numeric Pager

Panel Indicator Lights

Use the following table to understand the panel indicator lights.

Panel Indicator Lights

Button	When the Button Light is	When the Button
	On	Flashes
Arm Doors & Windows	Doors/Windows armed	Doors/Windows armed
		& No Entry Delay on
Arm Motion Sensors	Motion Sensors armed	Motion Sensors armed
		& Latchkey on
Disarm	System disarmed	System subdisarmed
System Status	System trouble or Open Sen-	System in alarm
	sor
Chime Doors	Door will cause chime	_________________
Chime Special Motion	Motion will cause chime	_________________
Time Lights	Time activated lights on	_________________
Sensor Lights	Sensor activated lights on	_________________

Numeric Pager

You may program your security system to send a numeric message indicating system activities to your pager. The system will send the message twice. See “Programming Instructions”.

Use the following table to determine what the numeric message is reporting.

Numeric Pager Reporting

Reports	Numeric Message	Reports	Numeric Message
Phone Test	-101 -101	Intrusion	-108 -108
AC Power Restore	-102 -102	Fire	-109 -109
AC Power Failure	-103 -103	Disarming	-110 -110
Latchkey	-104 -104	Arming	-111 -111
No Activity	-105 -105	Fail to Disarm	-112 -112
Panic Code	-106 -106	Fail to Arm	-113 -113
Emergency	-107 -107

Canceling and

Preventing

Accidental

Alarms

One of the biggest concerns you might have regarding your security system, is causing an accidental alarm. Most accidental alarms occur when leaving the residence after arming the system, or, before disarming the system upon your return.

Canceling Accidental Alarms

You may have up to 254 seconds (programmable by your installer) to cancel an acciden- tal alarm. See your installer to find out what time is programmed. If the programmed time has passed, you must call the central monitoring station to cancel the alarm.

You have ___ seconds to cancel an accidental alarm.

9 Simon Security System