Note
The phone number is auto- matically stored after you’ve pressed 26 digits. You will not have to press DONE to store the number. If the number is less than 26 dig- its, then DONE must be pressed.
2.Enter Access Code using the numbered keys. Panel announces, Please select from Start Menu.
3.Press Delete from the Start menu. Panel announces, Select from main menu
4.Press Option #. Panel announces, Option 1, press again for next option or done to select.
5.Press 42. Panel announces, Option 42, press again for next option or done to delete.
6.Press DONE. Panel announces, Option 42 deleted.
Option 43 - Pager Phone Number
Add enables the pager phone number and allows you to program up to 26 digits, includ- ing pauses.
Add 3 or 4 pauses to the end of the phone number to ensure the complete pager message will be received. Press the Test button to program a pause into the phone number.
1.Open panel cover. Panel announces, Use numbered keys to enter ID.
2.Enter Access Code using the numbered keys. Panel announces, Please select from Start Menu.
3.Press Add from the Start menu. Panel announces, Select from main menu
4.Press Option #. Panel announces, Option 1, press again for next option or done to select.
5.Press 43. Panel announces, Option 43, press again for next option or use numbered keys to enter phone number, then press done.
6.Enter a phone number with the numbered keys. Press Test to enter a pause in the phone number, press Add to enter a “*”, and press Delete to enter a “#”. Panel announces each number selected.
7.Press DONE. Panel confirms entered phone number.
Delete disables the pager phone number. The phone number will not be called in an alarm situation.
1.Open panel cover. Panel announces, Use numbered keys to enter ID.
2.Enter Access Code using the numbered keys. Panel announces, Please select from Start Menu.
3.Press Delete from the Start menu. Panel announces, Select from main menu
4.Press Option #. Panel announces, Option 1, press again for next option or done to select.
5.Press 43. Panel announces, Option 43, press again for next option or done to delete.
6.Press DONE. Panel announces, Option 43 deleted.
The panel will call the pager to indicate the following:
•No activity - A no activity alarm is called in if the programmed amount of time passes, and no activity has occurred on your system. Examples of such are: the panel is not subdisarmed, disarmed, sensors armed, a key has not been pressed or a sensor has not been tripped. Tripping of
•Latchkey - A latchkey report is called when the system is not disarmed by a prede- termined time. The latchkey time is programmed by the user (Option 03). Latchkey must be enabled when arming.
•Phone Test - A phone test report is called in when a phone test has been performed.
•Disarming - A disarming report is called in when the system is disarmed. This option is programmed by your installer.
•Arming - An arming report is called in when the system is armed. This option is programmed by your installer.
•Fail to Disarm - A fail to disarm report is called in when the system is not dis- armed by the time programmed by the installer.
•Fail to Arm - A fail to arm report is called in when the system is not armed by the time programmed by the installer.
19 | Simon Security System |
