Sensor Activated Lights
Turn on designated lights (with Lamp Modules) when a sensor is tripped. You can pro- gram lockout times when Sensor Activated Lights won’t be active (see Programming Options 36 and 37).
Turn Sensor Activated Lights On:
1.System must be disarmed. Press Sensor Lights button.
Panel will announce, sensor activated lights on. Sensor Lights button will be lit.
Turn Sensor Activated Lights Off:
1.Press Sensor Lights button.
Panel will announce, sensor activated lights off. Sensor Lights button no longer lit.
Lights On
Turns on lights that are controlled by Lamp Modules.
1.Press Lights On button twice.
Panel announce, Lights on. Lights On button will NOT be lit.
Lights Off
Turns off lights that are controlled by Lamp Modules.
1.Press Lights Off button twice.
Panel announces, Lights off. Lights Off button will NOT be lit
Silent Exit
This feature silences the status beeps that accompany the exit delay (see Status Beeps). Press Chime Doors after you arm the system to silence status beeps. The panel will still beep at the beginning and end of the exit delay.
EMERGENCY
|
|
|
|
|
| EMERGENCY | |||
|
|
|
|
|
|
|
| ||
| FIRE POLICE AUX | ||||||||
| Press FIRE, POLICE, or AUX for 2 seconds (or press twice quickly) to call the central | ||||||||
| monitoring station and notify them of a | ||||||||
|
|
|
|
|
|
|
|
| |
How Your | Your system responds to you through the use of panel voice messages, status beeps, | ||||||||
System | alarms, panel indicator lights, and to a numeric pager if programmed. | ||||||||
Communicates | Panel Voice Messages | ||||||||
to You | |||||||||
When you press the buttons on the panel or the touchpads, the panel responds with | |||||||||
| |||||||||
| voice messages. Panel voice can be enabled or disabled (see “Options”). | ||||||||
Note
The panel will not give voice messages during an AVM session. Talk to your security system dealer to see if your panel has the AVM option.
These messages may respond with system information or prompt you to take further action. For example, if you want to disarm the system and you press the DISARM but- ton, the panel responds by announcing, “Please enter your access code.”
If you press a button and the feature has not been programmed, the panel voice will respond with “Function not available.” An example of this would be pressing CHIME Special Motion button when you have no motion sensors in your system.
7 | Simon Security System |
