GE 60-875 manual RF Thermostat Operation, Programming Your System, Programming Instructions

Note

For any keypress on the Keychain Touchpad, hold the button until the indicator light blinks.

Note

Panic alarms need to be silenced from the panel, a remote handheld touchpad or another keychain touch- pad. They cannot be silenced from the same key- chain that activated the alarm.

LOCK Press once to arm doors and windows.

LOCK Press twice to arm doors, windows, and Motion Sensors.

LOCK Press 3 times to arm doors, windows, Motion Sensors, and to acti- vate the Latchkey option.

LOCK and UNLOCK

Press both buttons simultaneously for 3 seconds to send a panic (intru- sion, silent, or non-medical emergency) alarm to the central monitoring station. Check with the installer to find out how the keychain touchpad panic buttons will operate

UNLOCK Press to disarm your security system.

STAR Can be programmed to control a device connected to a universal module.

RF Thermostat Operation

These guidelines must be followed for RF Thermostat operation:

•The panel needs to be armed to Level 4 (Doors & Windows and Motion Sensors) to enter Energy Saving Mode.

•If there are no Motion Sensors in the system, the Motion Sensors button must still be pressed (armed to level 4).

•Both Option 81 and 82 can be turned on at the same time.

•Thermostat has to be in Auto Mode for Options 81 and 82 to work correctly.

•When the panel is disarmed the thermostat returns to normal operating mode.

Programming Your System

The programming decals are visible when you open the panel cover (see Figure 1.). These decals are designed to make system programming easier for you. Always begin by entering your access code. Then, choose an operation from the START MENU. Follow the prompts and flow arrows to complete the desired task. Notice the button flow diagrams following the Instruction Summary.

1.

Press Down

Doors &		Motion
Windows		Sensors			Status
						H O M E S E C U R I T Y
	Arm		Disarm		System
1 / 2	3 / 4	5 / 6		7 / 8		9 / 0
						C O D E
Special
Doors Motion		Time	Sensor		On	Off
						H O M E C O N T R O L
Chime				Lights
						E M E R G E N C Y
	FIRE	POLICE			AUX

Test Weekly

Version 3			START MENU
		Add	Delete	Cancel		Test
Press for program
* information.
			MAIN MENU
	Light		Sensor/		Access		Clock
	Control Option # Remote				Code		Set
	*	*	*
		0		1		2	3
		Entry/Exit	CONTROL MENU
	Unit #	Delay	Sensors	Time		-	Hours +
		*	*	*
Instruction	4	5	6		7		8
Summary			-	Minutes		+
Add Option
Option #1: Panel Beeps		DONE
Option #2: Panel Voice			Add Access Code
Option #3: Latchkey Time
Option #36: Sensor Activated Light Lockout Start Time
Option #37: Sensor Activated Light Lockout Stop Time			Press				, then
Option #41: Chime Voice
Option #42: Speaker Volume			use red numbers to enter 4-digit code.
Option #43: Pager Phone Number
Option #55: Status Beep Volume			Set Clock
Press	and follow voice prompts.		Press

System should be checked by a qualified technician at least every three years.

422-2806 Rev A

Note:

Hold key or press repeatedly until you hear the desired item.

9

Delete

To delete an option or access code

press and follow the voice prompting.

Cancel

If you make a mistake or want to

start over press

Sensor or Phone Test

To select a test, press and follow the voice prompting.

2.

Open Cover

Figure 1. Opening the panel cover

Programming Instructions

Use the following instructions to access the programming buttons and programming decals.

Simon Security System 12