Unit Number
Refers to a specific light within a house code.
How to set time for light control:
1.Open the cover of the panel.
2.The panel voice prompts you to Use numbered keys to enter ID. Enter your mas- ter access code using the numbered keys.
3.The panel voice prompts you to Please select from START MENU. Press the Add button on the START MENU.
4.The panel voice prompts you to Select from MAIN MENU. Press the Light Con- trol button on the MAIN MENU.
5.The panel voice responds with House Code is *, press again to change or press unit number. This is the House Code that was set by your installer. Don’t change it.
Press the Unit # button.
6.The panel responds with Unit #1 press again to change or select from control menu. Keep pressing the Unit # button until the correct unit is selected.
7.Press the Time button on the control menu. The panel voice prompts you, On time is **** to change press hours and minutes then press done.
8.Press the Hours and Minutes buttons to set the correct on time.
9.Press Done. Panel will announce, Off time is **** to change press hours and min- utes then press done.
10.Press the Hours and Minutes buttons to set the correct off time.
11.Press Done. Panel will announce the unit number with the on and off times you just programmed.
Programming | The following table is a list of options you can change. |
|
| ||||
Options |
|
|
| Programming Options |
|
| |
|
|
|
|
|
| ||
|
|
| Option # |
| Add | Delete |
|
|
|
|
|
|
|
|
|
|
| 01 | - Panel Beeps |
| On | Off |
|
|
|
|
|
|
|
|
|
|
| 02 | - Panel Voice |
| On | Off |
|
|
|
|
|
|
|
|
|
|
| 03 | - Latchkey Time |
| 12:00 am (midnight) to 11:59 pm | Off |
|
|
|
|
|
|
|
|
|
|
| 36 | - Sensor Activated Light |
| 12:00 am (midnight) to 11:59 pm | Off |
|
|
| Lockout Start Time |
|
|
|
| |
|
|
|
|
|
|
|
|
|
| 37 | - Sensor Activated Light |
| 12:00 am (midnight) to 11:59 pm | Off |
|
|
| Lockout Stop Time |
|
|
|
| |
|
|
|
|
|
|
|
|
|
| 41 | - Chime Voice |
| On | Off |
|
|
|
|
|
|
|
|
|
|
| 42 | - Speaker Volume |
| 1 - 8 | 8 (highest) |
|
|
|
|
|
|
|
|
|
|
| 43 | - Pager Phone Number |
| Up to 26 digits* | Off |
|
|
|
|
|
|
|
|
|
|
| 55 | - Status Beep Volume |
| 1 - 10 | 7 |
|
|
|
|
|
|
|
|
|
|
| 81 | - Heating Set Point |
| 51°F - 91°F | Off |
|
|
|
|
|
|
|
|
|
|
| 82 | - Cooling Set Point |
| 51°F - 91°F | Off |
|
|
|
|
|
|
|
| |
|
|
| * See “Option 43 - Pager Phone Number” |
|
| ||
|
|
|
|
|
| ||
| Press Add in the START MENU and follow the voice prompts to turn an option on. | ||||||
| Press Delete in the START MENU to turn an option off. |
|
| ||||
| When entering a single digit option number | ||||||
| ber (i.e. 01, 02, .....). All option numbers must be 2 digits. |
|
| ||||
15 | Simon Security System |
