Indicator
Meaning | Remedy |
The toner is running low. | Have a new toner container ready. |
The toner has run out. | Replace with a new toner container. |
| After replacing the toner container, |
| clean the inside of the printer. |
Unable to print with the specified | Add the expansion memory to the |
resolution due to insufficient | printer. |
memory. |
|
|
|
CF card is not formatted. | Format the CF card. |
Specified file not found. | Press [GO] to continue processing. |
| Press [Cancel] to cancel processing. |
|
|
The current printing cannot be | Press [GO] to continue processing. |
continued. | Press [Cancel] to cancel processing. |
|
|
Unable to print due to insufficient | Install the expansion memory in the |
memory. | printer. Press [GO] to continue |
| processing. Press [Cancel] to cancel |
| processing. |
|
|
Unable to print as the data is too | Press [GO] to continue processing. |
complicated. | Press [Cancel] to cancel processing. |
Error Indication
If the indicators light or flash repeatedly in manners not described above for normal or maintenance indication, a service error has probably occurred. Turn the printer off by the power switch, wait 5 seconds and then turn the printer on again. This may clear the error. Even if the error is not cleared, contact your service technician.
Troubleshooting |
