Printed Results | Corrective Action | ||||
|
|
|
|
|
|
Faint or blurred printing | Check the toner container and if necessary replace. Refer to Toner | ||||
|
|
|
|
| Container Replacement on page |
|
|
|
|
|
|
|
|
|
|
| Clean the charger wire. Refer to Cleaning the Printer on page |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray background | Check the toner container and if necessary replace. Refer to Toner | ||
|
|
| Container Replacement on page |
|
|
| |
|
|
|
|
|
|
| Check the process unit and drum unit are installed correctly. Refer to |
|
|
| Cleaning the Printer on page |
|
|
|
|
Dirt on the top edge or back of the | If the problem is not solved even after printing several pages, clean | ||
paper | the registration roller. Refer to Cleaning the Printer on page | ||
|
|
| If the problem is not solved after cleaning, call for service. |
|
|
|
|
Printing incomplete or out of position Check that the printing settings are correct in the application software and the printer driver.
Check whether the problem is being caused by a PRESCRIBE command error. If the problem occurs only with a specific file or program, the most likely cause is an error in a parameter to a command or command syntax.
Troubleshooting |
