Network Interface Card (IB-23)
The network interface card supports TCP/IP, IPX/SPX, NetBEUI and AppleTalk protocols, so that the printer can be used on network environments including Windows, Macintosh, UNIX, NetWare, etc.
The network interface card must be installed in the option interface slot that is located at the back of the printer.
1 |
2 |
3 |
Turn off the printer and disconnect the power cord and printer cable.
Open the rear cover.
Remove the optional interface slot cover.
4Insert the Network Interface Card and secure it with the screws removed in step 3.
5Close the rear cover, and connect the printer cable.
6Connect the power cord, and turn on the printer.
7Configure the network address from Quick Setup. For more information, refer to Operation Guide of the network card.
Option |
