Cancel The Finalization Of A | Direct Access To “FINALIZE” Setting |
1Load a
2Press rt to select “CANCEL
DISC FINALIZATION”, then press
ENTER.
3 Press w e to select “OK”, then press ENTER when “CANCEL DISC FINALIZATION” appears on the TV screen.
4 Press SET UP to return to the normal screen.
●When the disc finalization is cancelled, the mode in which the disc was formatted is restored, making the disc recordable. ( pg. 7, 62)
When you wish to finalize or cancel the finalization of a disc, besides accessing the “FINALIZE” setting through the SET UP button, you can also use the FINALIZE button on the remote control. This FINALIZE button enables you to access the “FINALIZE” setting directly after loading the disc.
To finalize a discALoad the disc.
BPress DVD so that the DVD lamp lights up on the unit. C Press FINALIZE to access the “FINALIZE” setting.
● The screen in step 6 of “Finalize A
D Perform steps 6 to 8 of “Finalize A
APerform steps A to C of “To finalize a disc” above.
●The screen in step 2 of “Cancel The Finalization Of A
BPerform steps 2 to 4 of “Cancel The Finalization Of A
NOTES:
●The direct access (FINALIZE) function works only when in the DVD deck mode, on the condition that the Main Menu or Library Database DVD Navi screen is not displayed.
●The direct access (FINALIZE) function will not work in the following
cases, and an operation prohibition mark “ ” appears on the TV screen.
●During DVD recording or playback.
●Disc is not loaded.
●A
●A
●Disc reading in progress.
●Disc information acquisition failure when
●When this unit is in the VCR deck mode or when dubbing is in
progress, the direct access (FINALIZE) function will also not work. However, “ ” will not be displayed.