JVC TK-C215VP4, TK-C215VP12 instruction manual Inserting the silica gel supplied, Memo

4. Inserting the silica gel supplied

Take out the silica gel from the aluminum package, insert it into the silica gel insertion space of the camera unit and fasten using the lug plate.

Silica Gel Insertion

Space

Silica Gel

Lug Plate

Memo:

●During reconnection or re-installation after repair or maintenance, make sure to replace the silica gel with a new one.

●Consult your nearby JVC’s dealer on the replacement procedures.

Serial number of part to be replaced: Use a LW40500-001A silica gel.

Note:

●When mounting is performed on a rainy day, make sure that rain water does not enter this unit.

●Make sure to use the silica gel supplied. Failure to do so may cause the camera lens and dome cover to fog.

●If the angle of view is not adjusted immediately after mounting the camera, insert the silica gel after adjustment is completed. The silica gel loses its effect if it is exposed to the air for a prolonged period of time.

21