Installation and Connection
Mounting the inner dome
After setting is complete, mount the inner dome to the camera.
1. Mounting the inner dome
Mount the inner dome to the 3 lugs.
Lug(x 3)
Inner
Dome
Mounting the dome cover
1. Cleaning the dome cover
Before mounting, remove any dust or dirt from the dome cover.
Memo:
●Dirt that is not removed from the cover before mounting may appear on the camera’s image.
Memo:
●Do not apply excessive force to the dome cover such as stretching it.
2. Mounting the dome cover to the base
Mount the dome cover by aligning the 3 position marks on the base with the dome cover.
3. Fastening the dome cover
Fasten by tightening the 3 fastening screws of the dome cover using the wrench supplied.
Position Alignment Mark (x 3)
Note:
●Mount the inner dome such that it does not
cover the lens.
● When mounting the inner dome, make sure
not to move the position of the lens. Doing so |
|
|
may cause the preset angle of view to go out |
| 2 |
of alignment. | 3 | |
| ||
|
| |
|
| Wrench |
|
| (Supplied) |
24