Camera-mounting bracket, Rotation prevention hole | JVC TK-WD31

3[BF LOCK] Back focus locking screw (⋅ 2: 2 mm) This serves to fix the back focus-adjusting ring.

4Camera-mounting bracket

The bracket has been attached on the bottom of the camera before shipment. It can also be attached on the top according to the cir- cumstance.

To re-attach the bracket use the threaded holes at the top, with the camera mounting bracket locking screws 7.

5Camera-mounting screw hole (1/4 inch) Use this hole when mounting the camera onto a fixer, pan/tilt unit, and the like.

(Use a screw shorter than 7 mm.) (☞ Page 18)

MAX.

7mm

6Rotation prevention hole

Make use of this rotation-preventive hole to prevent any fall when mounting the camera. Make sure that the camera is securely mounted.

7Camera mounting bracket fixing screws (⋅ 2: M2.6 ⋅ 6 mm) Be sure to use a 6 mm long screw.

9

Image 15

JVC TK-WD31 manual Camera-mounting bracket, Use a screw shorter than 7 mm, Rotation prevention hole

Contents

LWT0181-001B-H Color Video Camera TK-WD310INSTRUCTIONS Important Safeguards Page III Page Safety Precautions Page Introduction Features Reference page or item Memo Contents Operating Precautions Introduction Page Backfocus adjustment ring Names and Operations of PartsFront and Bottom Lens mount Camera-mounting bracket Use a screw shorter than 7 mm.Rotation prevention hole Rear Panel Video OUT Video signal output connectorPower Power indicator lamp This lamp lights when power is supplied to the camera SET button Selector buttonThis is set for internal synchronization INT This is connected to an automatic iris control lens. VIDEO/DC Iris Selector SwitchSide Panel Iris Iris Terminal System with up to 8 cameras Basic System Mounting the lens Mount the lens according to the procedures described below DC Iris Video Iris VideoGND Connections on the back Power supply DC 12 V or AC 24 Conductor diameter Φmm More 100 m 260 m 410 m 500 m Reference Mounting the camera Fall Prevention Auto iris lens adjustment Too dark Clockwise Toward H Level adjustmentLevel turning direction Too bright Back focus adjustment With a zoom lens With a fixed-focus lens Operation Menu settings C M OD E Menu screens are structured as shown below Menu tree Mode Focus Adjust screenDefault setting OFF About menus WDR Mode Video Adjust screen WDR Mode Wide Dynamic Range WDR is adjusted manually EXP. Bias ContentWDR Bias WDR Limit Setting Gain AGC Mode Memo White Balance Default setting ATW Preparation Manual Enhance Level Camera Settings screenThis setting is performed when using the DC auto iris lens Color Level DC Offset PhaseCamera Title DC Gain Repeat steps 4. and 5. above to enter up to 24 characters Camera Title Edit screen Allowed characters Factory Settings screen Returns set values to their factory settingsClear Ultra Super High MID LOW OFF MAX MIN TroubleshootingSymptom Remedy Operation becomes un Lx 50%, F1.2, AGC ULTRA⋅16 SpecificationsVideo OUT Lx 50%, F1.2, AGC High TK-WD310 Color Video Camera