Mounting the camera | JVC TK-WD31 guide

CONNECTION/INSTALLATION

Mounting the camera

Camera mounting screw hole

Camera mounting bracket

Rotation prevention hole

When mounting the camera on a fixer, pan/tilt, etc., use the camera mounting screw hole located on the camera-mounting bracket.

CAUTION:

Use the screw with a length shorter than 7mm from a camera-mounting face.

MAX. 7mm

Furthermore, make use of the rotation prevention hole to prevent the camera from falling and securely mount the camera.

Special precautions must be taken for mounting the camera on a wall or a ceiling. We are not liable for any damage caused by improper installation.

18

Image 24

JVC TK-WD31 manual Mounting the camera

Contents

Color Video Camera TK-WD310INSTRUCTIONS LWT0181-001B-H Important Safeguards Page III Page Safety Precautions Page Features Introduction Memo Reference page or item Contents Operating Precautions Introduction Page Backfocus adjustment ring Names and Operations of PartsFront and Bottom Lens mount Camera-mounting bracket Use a screw shorter than 7 mm.Rotation prevention hole Video OUT Video signal output connector Power Power indicator lampThis lamp lights when power is supplied to the camera Rear Panel SET button Selector buttonThis is set for internal synchronization INT VIDEO/DC Iris Selector Switch Side PanelIris Iris Terminal This is connected to an automatic iris control lens. Basic System System with up to 8 cameras Mount the lens according to the procedures described below Mounting the lens DC Iris Video Iris VideoGND Power supply DC 12 V or AC 24 Connections on the back 100 m 260 m 410 m 500 m Reference Conductor diameter Φmm More Mounting the camera Fall Prevention Auto iris lens adjustment Level adjustment Level turning directionToo bright Too dark Clockwise Toward H Back focus adjustment With a fixed-focus lens With a zoom lens Menu settings Operation C M OD E Menu tree Menu screens are structured as shown below Focus Adjust screen Default setting OFFAbout menus Mode Video Adjust screen WDR Mode Wide Dynamic Range WDR is adjusted manually WDR Mode Content WDR BiasWDR Limit EXP. Bias AGC Mode Setting Gain Memo Default setting ATW White Balance Manual Preparation Camera Settings screen This setting is performed when using the DC auto iris lensColor Level Enhance Level Phase Camera TitleDC Gain DC Offset Camera Title Edit screen Repeat steps 4. and 5. above to enter up to 24 characters Allowed characters Factory Settings screen Returns set values to their factory settingsClear Troubleshooting Symptom RemedyOperation becomes un Ultra Super High MID LOW OFF MAX MIN Specifications Video OUTLx 50%, F1.2, AGC High Lx 50%, F1.2, AGC ULTRA⋅16 TK-WD310 Color Video Camera