INTRODUCTION
Operating Precautions
●To save energy, when it is not being used turn the system’s power off.
●This camera has been designed for indoor use.
When you use it outdoors, be sure to use an appropriate housing.
●Do not install or use the camera in the following places.
•In a place exposed to rain or moisture.
•In a place with vapor or oil soot, for example in a kitchen.
•When the ambient temperature rises above or falls below the ac- ceptable range (from
•Near a source of radiation,
•In a place where corrosive gasses are generated.
•In a place subject to vibration.
•In a place with excessive dirt.
●If this camera and the cables connected to this camera are used where there are strong electromagnetic waves or where there is magnetism present, for example near a radio or TV transmitter, power transformer or an electric motor, the picture may produce noise and the colours may be affected.
●This camera incorporates an AGC circuit. As a result, when it is used under low light conditions, the camera sensitivity is automati- cally boosted and the picture may look uneven. However, this is not a malfunction.
●When this camera is used in the ATW mode, the recorded colours may be slightly different from the actual colours due to the opera- tional principles of the
●Hunting may occur depending on the used lens. However, this is not a malfunction of the unit.
●The screen surroundings may appear dark depending on the used lens.
5
