JVC TM-A101G manual Display and Selections in the SET-UP Menu Mode Setting, Advance

DISPLAY AND SELECTIONS IN THE <SET-UP MENU> MODE (SETTING)

You can set the following set-up menu items.				<SET-UP MENU> screen
• H. POSITION	• CONTROL LOCK	• INPUT REMOTE	1				<SET-UP MENU>
• WHITE BALANCE	• STATUS DISPLAY	• ASPECT REMOTE			‰	H. POSITION			: 00
						WHITE BALANCE
Note:						CONTROL LOCK			: OFF
						STATUS DISPLAY			: ON
● Parameter for H. POSITION can be set separately depending on the video input						INPUT REMOTE			: OFF
						ASPECT REMOTE			:	OFF
(Input A (VIDEO) or Input B (VIDEO)) selected by the input select buttons on the front			2
panel.
Select the required video input with the input select buttons on the front panel in
								EXIT
advance.

3

4

1.While pressing the MENU button, press the CHROMA/PHASE button.

CHROMA CONTRAST	VOLUME/SELECT	MENU
PHASE BRIGHT

CHROMA MENU

PHASE

The <SET-UP MENU> screen is displayed.

* The screen automatically disappears when no operation is performed after about 5 minutes.

<Front panel buttons>

1Selection mark (4): Indicates the menu item you select.

2Menu item: Menu items you can select.

3Setting display: Indicates the

2.Press the CHROMA/PHASE or CONTRAST/BRIGHT button to select the desired menu item.

current settings (value).

4 Function display: The functions of

the front panel buttons (5 buttons

on the left) correspond to the

CHROMA CONTRAST

PHASE BRIGHT

H.POSITION WHITE BALANCE CONTROL LOCK STATUS DISPLAY

A selection mark (4) is put next to the selected item.

Front panel	Function	Contents
button	displayed
CHROMA/		Forward selection mark (4)
PHASE
CONTRAST/		Reverse selection mark (4)
BRIGHT

function displayed.

Function	Contents
displayed
	Forward the menu item.
	Reverse the menu item.
–	Lower the adjustment
	value. (to the minimum)
+	Raise the adjustment

INPUT REMOTE

ASPECT REMOTE

3. Press the VOLUME/SELECT buttons to set.

	Front panel	Function	Contents
VOLUME/SELECT	button	displayed
	VOLUME/	+	Increase (to max. value)
		4	Forward the setting value
	SELECT (+)
		CUTO	Selects CUT OFF setting screen
	VOLUME/	–	Decrease (to min. value)
		1	Reverse the setting value
	SELECT (–)
		DRV	Selects DRIVE setting screen

Notes:

●To adjust the white balance, select WHITE BALANCE and press the VOLUME/SELECT (+) or (–) button to display the CUT OFF or DRIVE setting screen, then adjust each setting.

●Press the EXIT (MENU) button to return to the <SET-UP MENU> screen.

	value. (to the maximum)
4	Forward the setting value.
1	Reverse the setting value.
EXIT	Exit the <SET-UP MENU>
	screen. (release)
DRV	Selects DRIVE adjustment.
CUTO	Selects CUT OFF
	adjustment.
RB	Adjusts red and blue
	signal level.
RGB	Adjusts red, green and
	blue signal level.
	Turns the ON-SCREEN
	display on or off. (This
DISP	function is effective only
	in the DRIVE or CUT OFF
	adjustment mode.)

9