JVC TM-A101G manual Basic Connection Example,  VIDEO A Connection Example Select Input A VIDEO

BASIC CONNECTION EXAMPLE

Notes:

•Before connecting your system, make sure that all units are turned off.

•The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting.

•Each pair of input (IN) and output (OUT) terminals are bridge-connected.

•If you’re not connecting any equipment to a bridged output (OUT) terminal, be sure not to connect any other cables to the bridged output (OUT) terminal as this will cause the terminating resistance switch to open (auto terminate function).

•When making a bridge connection, connect the input (IN) and output (OUT) terminals on the monitor to separate video components.

(For example, if both terminals are connected to the same VCR, resonance may occur except during playback. This is caused by the same video signal “looping” between the VCRs, and is not a malfunction.)

•Select the video input (INPUT A (VIDEO) or INPUT B (VIDEO)) with the INPUT SELECT buttons on the front panel.

•The ASPECT RATIO or INPUT A/B settings can be controlled via the REMOTE terminal by setting ASPECT REMOTE or INPUT REMOTE in the <SET-UP MENU> screen to valid. (Refer to pages 9 and 10.)

VIDEO A Connection Example (Select Input A (VIDEO))

		VIDEO A
	Video		Video
Video Camera	(Video signal cable)		(Video signal cable)
	IN	OUT
		VIDEO B
			Video
			(Video signal cable)
	IN	OUT		VCR
	Audio	AUDIO A
Video Monitor	(Audio signal cable)
			Audio
	IN	OUT	(Audio signal cable)
			Audio
VCR			(Audio signal
	IN	OUT
			cable)	Video Monitor
		AUDIO B
 VIDEO B (VIDEO) Connection
Example (Select Input B (VIDEO))
	INPUT	ASPECT
		REMOTE
Video Camera
	Video			VCR
	(Video signal cable)
Video Monitor	Audio
	(Audio signal cable)			Video Monitor
VCR
External control switch			REMOTE	External control switch
	REMOTE
open circuit (open)				open circuit (open)

		RCA pin		(Remote cable)	(Remote cable)	RCA pin
closed circuit (short)								closed circuit (short)
External control	External control switch					External control	External control switch
functions	Open circuit		Closed circuit			functions	Open circuit		Closed circuit
	(open)		(short)					(open)	(short)
INPUT	INPUT A		INPUT B		: Signal Flow	ASPECT RATIO		4–3 (4:3)	16–9 (16:9)

12