JVC TM-A101G manual Rear View, Rear Panel, Video A terminals VIDEO A IN/OUT

REAR VIEW

<Rear Panel>

	VIDEO A
IN	OUT
	VIDEO B
IN	OUT
	AUDIO A
IN	OUT
IN	OUT
	AUDIO B
INPUT	ASPECT
	REMOTE

	VIDEO A
	10
IN	OUT
	VIDEO B
	11
IN	OUT
	AUDIO A
	12
IN	OUT
IN	13
	OUT
	AUDIO B

INPUT ASPECT REMOTE

14

10 Video A terminals [VIDEO A IN/OUT]

Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.

IN : Video signal input terminal

OUT : Bridge-connected video signal output terminal

Notes:

*For corresponding audio signals, use the AUDIO A terminals @.

*Also refer to BASIC CONNECTION EXAMPLE on page 12.

11 Video B terminals [VIDEO B IN/OUT]

Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.

IN : Video signal input terminal

OUT : Bridge-connected video signal output terminal

Notes:

*For corresponding audio signals, use the AUDIO B terminals #.

*Also refer to BASIC CONNECTION EXAMPLE on page 12.

12 Audio A terminals [AUDIO A IN/OUT]

Input (IN) and output (OUT) terminals for the audio signal corresponding to the VIDEO A terminals 0.

The output terminal is bridge-connected.

IN : Audio signal input terminal

OUT : Bridge-connected audio signal output terminal

Notes:

*For corresponding video signals, use the VIDEO A terminal 0.

*Also refer to BASIC CONNECTION EXAMPLE on page 12.

13 Audio B terminals [AUDIO B IN/OUT]

Input (IN) and output (OUT) terminals for the audio signals corresponding to the VIDEO B terminals ! . The output terminal is bridge-connected.

IN	: Audio signal input terminal
OUT	: Bridge-connected audio signal output terminal

Notes:

*For corresponding video signals, use the VIDEO B terminals !.

*Also refer to BASIC CONNECTION EXAMPLE on page 12.

14 Remote terminals

[REMOTE INPUT, ASPECT]

Remote terminals for external control. Selecting VIDEO A or VIDEO B and ASPECT RATIO is available via external control. External control is set in the <SET-UP MENU> screen.

To use external control, you must build a switch cable and connect it to the REMOTE terminals.

External control	External control switch
	Open circuit	Closed circuit
functions
	(open)	(short)
ASPECT RATIO	4–3 (4:3)	16–9 (16:9)
INPUT	INPUT A	INPUT B

Note:

●Also refer to BASIC CONNECTION EXAMPLE on page 12.

5