JVC UX-A52 English, Basic CD Operations, To stop playback for a moment, To go to another track

English

To stop during play, press 7.

The following information appears.

CD indicator

Total track number

Total playing time

To remove the disc, press CD open/close 0.

The electronic swing panel slides upward, and the disc tray comes out.

•After removing the CD, press CD open/close 0 again to close the electronic swing panel.

Basic CD Operations

While playing a CD, you can do the following operations.

To stop playback for a moment

Press CD 3 / 8.

The elapsed playing time starts flashing on the display. To resume playback, press CD 3 / 8 again.

To locate a particular point in a track during play

Press and hold ¢or 4.

•¢ : Fast-forwards the tracks.

•4 : Fast-reverses the tracks.

To go to another track

Press ¢or 4 repeatedly.

•¢ : Skips to the beginning of the next or succeeding tracks.

•4 : Goes back to the beginning of the current or previous tracks.

To go to another track directly using the number buttons

On the remote control ONLY:

Pressing the number button(s) allows you to start playing the track number you want.

Ex.: For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 32, press +10, +10, +10, then 2.

To check the clock time while playing back CD

On the remote control ONLY:

Press DISPLAY (not on number buttons.)

•Each time you press the button, the source information and the clock time alternate on the display.

– 19 –