JVC UX-A52 English, Recording External Equipment, To record a single track during play or pause

English

To record a single track during play or pause

While playing back you want to record, perform steps 3 and 4.

The playback of the track is stopped, and then starts from the beginning again. This time, the cassette deck starts recording the track.

•After the track is recorded, both the CD player and the cassette deck stop automatically.

To check the clock time while recording from the CD onto a tape

On the remote control ONLY:

Press DISPLAY (not on number buttons.)

•Each time you press the button, the recording information and the clock time alternate on the display.

Recording External Equipment

You can record from external equipment onto a tape.

The external equipment needs to be connected to LINE IN (AUX) terminal of this unit (for how to connect,

see page 9.)

On the unit ONLY:

1 Insert a recordable cassette into the cassette loading slot.

•Press TAPE @ # to adjust the tape direction

to “ ” then 7.

2 Press AUX/MD.

The source is changed to “AUX.”

3 Press MODE select to select a recording mode.

•Each time you press the button, recording mode changes as follows:

MODE1/2 MODE2/2

Canceled

Tape indicator

Recording mode

Reverse mode

Ex. When selecting MODE 1/2

4 Press REC start.

The recording starts.

5 Start playback on the external equipment.

To stop recording, press 7.

To check the clock time while recording from the external equipment onto a tape

On the remote control ONLY:

Press DISPLAY (not on number buttons.)

•Each time you press the button, the recording information and the clock time alternate on the display.

– 29 –