JVC UX-A52 manual English, Connecting Antennas, AM antenna, To connect an outdoor FM antenna

English

Connecting Antennas

FM antenna

ANTENNA
AM	AM	EXT
	LOOP
FM(75Ω)
COAXIAL

FM antenna (supplied)

AM antenna

1	2
ANTENNA			Vinyl-covered wire
			(not supplied)
	AM
AM		EXT
	LOOP
FM(75Ω)
COAXIAL

1Attach the FM antenna to the FM (75 Ω) COAXIAL terminal.

2Extend the FM antenna.

3Fasten it up in the position which gives you the best reception.

About the supplied FM antenna

The FM antenna supplied with this unit can be used as temporary measure. If reception is poor, you can connect an outdoor FM antenna.

To connect an outdoor FM antenna

Before connecting it, disconnect the supplied FM antenna.

Outdoor FM antenna (not supplied)

ANTENNA
AM	AM	EXT
	LOOP
FM(75Ω)
COAXIAL

A 75 Ω antenna with coaxial type connector should be used.

3

AM loop antenna

(supplied)

1If cords are covered with insulation, twist the core of the cord at the end of each cord, then remove the insulation.

2Connect the AM loop antenna to the AM LOOP terminals as illustrated.

3Turn the AM loop antenna until you have the best reception.

To connect an outdoor AM antenna

When reception is poor, connect a single vinyl-covered wire to the AM EXT terminal and extend it horizontally. The AM loop antenna must remain connected.

For better reception of both FM and AM

•Make sure the antenna conductors do not touch any other terminals and connecting cords.

•Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.

– 7 –