Mounting the Camera (TK-C655 and TK-C676)
Interior of Housing | 1. Connect the AC 24 V output cable to the camera |
| Connect the AC 24 V output cable to the ceiling mount of |
JVC Mark Notch | the camera to be installed. |
Camera Mounting Bracket
Safety Wire
Main Board
2.
Cables
|
| F Mark | |
1. |
| Ceiling | |
AC 24 V Output | 3. | Mount | |
ScrewsSupplied | |||
Cable | |||
|
| (4 pcs) | |
|
| 4. | |
To [POWER INPUT AC 24 V] |
|
| |
Terminal of Ceiling Mount |
| Camera | |
|
|
2. Connect other cables
Connect the coaxial video cable and communication cables (alarm signal, control terminal, etc.) supplied with the housing to the ceiling mount.
CAUTION:
●Connect the communication cable to the [ALARM IN/OUT] and [CONTROL] terminals if necessary. For safety reasons, ensure to cut off any excess cable and bind using an insulating tape before use.
●For further details on connection, please refer to the instruction manual of the camera in use.
●Ensure to bind connectors of LAN cables and DC 12 V Power Cable that are not in use with an insulating tape before use.
3. Mount the ceiling mount of the camera to the main housing unit
Use the 4 screws supplied to mount the ceiling mount to the main housing unit.
CAUTION:
During mounting, align the F mark of the ceiling mount with the notch on the camera mount bracket of the main housing unit.
4. Mount the camera to the ceiling mount
Follow instructions in the manual of the camera to be installed to mount the camera to the ceiling mount.
11
