JVC XV-1000BK Audio CD Operations, Playing back a track, Using 4 / ¢ buttons during playback

Audio CD Operations

Playing back a track

								S		E	X
									N		T
							VIOU
						SE	PRE
					AU
				/P
			AY
		P	PL
	O
T
S

1 2 3

4 5 6

7 8 9

0

+100 10 +10

This chapter explains all the functions of the XV-1000BK for playing back audio CDs. Read “Basic Operations” on pages 19 and 20 before reading this chapter.

7Using 4 / ¢ buttons during playback

Pressing ¢causes the XV-1000BK to jump to the next track and start playback. Therefore, press ¢as many times as required to jump to the desired track and start playback.

Similarly, pressing 4 causes the XV-1000BK to jump to the beginning of the current track and start playback. By pressing it again, the XV-1000BK jumps to the previous track and starts playback.

7Using numeric keys

You can also use the numeric keys on the remote control unit to select a track number. The XV-1000BK automatically starts playback from the selected track regardless of the player's mode.

See page 16 for details about how to use the numeric keys.

Resuming playback

RESUME

RESUME

The XV-1000BK can memorize a position on a disc you specify and resume playback from that position later.

7Memorizing a position

1.Press RESUME during playback to memorize the current playback position. When memorized, the RESUME indicator on the front panel lights.

*Switching the power to STANDBY during playback current memory. The STANDBY memory settings then become valid.

To clear the memory:

Take out the disc from the disc tray.

*The memory is not cleared by switching the power to STANDBY.

*The last memory overrides the previous memory.

7Resuming playback

1.Press the RESUME button when the power is in the standby mode.

The player will locate the memory position and start playback.

30