JVC XV-1000BK manual Troubleshooting, Other Information

Other Information

Troubleshooting

What appears to be a malfunction may not always be serious. Please go through the following list before requesting service.

Symptom	Possible cause	Remedy
Power does	Power plug is not inserted	Plug in securely.
not come on.	securely.
Remote control	Too far from the XV-1000BK.	Come closer to the XV-1000BK.
does not work.
	The tip of the remote unit is	Point the infrared light-
	not pointed in the right	emittingwindow toward the
	direction.	remote sensor on the front panel.
	Batteries are exhausted.	Replace the batteries with new
		ones.
	Battery polarity is incorrect.	Take out the batteries and
		insert them again in the correct
		direction.
No picture is	Connection of video cable is	Connect the cable correctly
displayed on	incorrect.	(see pages 9 and 10).
the monitor.
	Input selection of TV is incorrect.	Select correctly.
	Disc is not playable.	(See pages 15.)
No audio is	Connection to stereo system	Check connections
reproduced.	is incorrect.	(see Page 9 to 12).
	Input selection of amplifier	Select correctly.
	is incorrect.
No sound from	PHONES LEVEL is too low.	Adjust the PHONE LEVEL.
headphones.
Sound is	Disc is dirty.	Wipe the disc surface
distorted or		(see page 52).
noise is
	XV-1000BK is connected to	Connect XV-1000BK with the
generated.
	a VCR.	TV directly.
Picture is
garbled.
Picture does	MONITOR TYPE is not	See “MONITOR TYPE”
not fit with the	correctly set.	on page 48.
television
	Television is not correctly set.	Set the television correctly.
screen.
Operation is	Microcomputer malfunctions	Turn off the power, then
not possible.	due to lightning or static	connect the power cord again.
	electricity.
	Moisture condensation occurs	Turn off the power,
	by sudden change of	then turn it on a few hours
	temperature or humidity.	later.

There may be causes other than the XV-1000BK. Check the other devices connected to the XV-1000BK.

56