JVC XV-N315B, XV-N210B, XV-N316S manual Basic operations, Direct selection for Jpeg files

	CANCEL
	ZOOM
5/∞/2/3	MENU -THUMBNAIL/
	LIST
	ENTER
4	3 (SELECT)
	¢
7	8

Basic operations

When you insert a disc with groups and files, the Control display that shows the contents of the disc automatically appears on the TV screen.

You can specify and play back the desired group/file from the Control display using the following procedure.

1 Make sure that the cursor bar is in the left (group) column on the Control display.

	Current playback mode				Select these sections to
					show the upper layer.
				DISC CONTROL
		NORMAL			GROUP		--
					MP3		MOVIE01.asf
					MPEG4		MOVIE02.asf
playbackfiles					SLIDESHOW		PICT01.jpg
					MIX		PICT02.jpg
							PICT03.jpg
							MUSIC01.mp3
							MUSIC02.mp3
Audio/Video
	Current						Selected file
	group
						File column
			Group column

•If it is in the right column, press 2 to move it to the left column.

2 Press 5/∞ to move the bar to a desired group, then press ENTER or 3.

• In the right column, files in the selected group are shown.

3 Press 5/∞ to select the desired file, then press ENTER.

The selected file is played back.

•When you press 3 (SELECT), the continuous playback starts from the selected file.

•You can change the files on the list by pressing 4/¢.

NOTES

•Files can also be selected by pressing the numeric buttons.

•If no operation is made for more than 5 minutes while the Control display is shown, the screen saver function will be activated and the Control display disappears.

To pause playback

Press 8.

Pressing 3 (SELECT) resumes normal playback.

To zoom in a picture

Press ZOOM.

•Each time you press ZOOM, the magnification rate is changed

— 1.5 times, 2 times and 4 times for JPEG file; 2 times and 4 times for MPEG-4 file. (4-time magnification for JPEG file is possible only when its resolution is 640 x 480 pixels or more.)

•The four-time magnification may not work for some MPEG-4 files according to their resolutions.

•Pressing 5/∞/2/3 moves the zoomed position during playback of JPEG file. [PAN UP], [PAN DOWN], [PAN LEFT] and [PAN RIGHT] are shown respectively on the TV screen.

To cancel the zoom function, select the normal size by pressing ZOOM repeatedly.

To rotate/reflect a still picture

While a still picture is played back:

•Pressing 3 rotates the picture by 90° clockwise.

•Pressing 2 rotates the picture by 90° counterclockwise.

•Pressing 5 reflects the picture vertically.

•Pressing ∞ reflects the picture horizontally.

•[ROTATING] is shown on the TV screen.

To stop playback

Press 7.

The Control display appears on the TV.

NOTES

•It may take time to show the Control display due to the layer configuration of the files and groups.

•The elapsed time may be incorrectly indicated on the display window due to the recording condition of the file.

•In the normal playback mode, playback stops when all the files in a group are played.

•The playback information appears on the TV as follows:

-[JPEG DATA ERROR] means that this player cannot play back the file.

-[JPEG DATA CORRUPTED] means that the file has error but the player can play it back.

-[NEXT] means the player skips to the next file.

-[PREVIOUS] means the player skips to the previous file.

-[SELECT] means the file is selected on the thumbnail screen.

Direct selection for JPEG files

You can select a particular JPEG file from the thumbnail screen.

1 Press and hold MENU - THUMBNAIL/LIST while a JPEG file is selected on the Control display.

The thumbnail screen appears on the TV screen. Up to nine thumbnails from the selected file at a time can be displayed on the screen.

•When selecting a group on the Control display, the thumbnail screen does not appear.

2 Press 5/∞/2/3 to select the desired picture on the thumbnail screen, then press ENTER.

The selected picture is played back.

•You can change the thumbnails by pressing 4/¢. All the JPEG files in the single group are displayed every nine thumbnails.

22