JVC XV-S42SL Getting started, Connections, Before making any connections, To connect to a TV

Getting started

Connections

*In the following description, “TV” may be substituted with “monitor” or “projector.” *Before using the unit, you have to connect the unit to a TV and/or amplifier.

Before making any connections

•Do not connect the AC power cord until all other connections have been made.

•Since different components often have different terminal names, carefully read the instructions supplied with the component you are going to connect.

To connect to a TV

English

English

English

You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio outputs to your separate audio equipment. (See the following pages.)

The unit

DIGITAL OUT	VIDEO OUT				* If the TV has an AV COMPU LINK terminal,
				AV COMPU LINK	you can use the AV COMPU LINK function
PCM / STREAM	Y PB		PR
	COMPONENT
COAXIAL					See “AV COMPU LINK remote control
OPTICAL			VIDEO OUT
			SELECT		system” on page 47 for details.
			NTSC PAL
-VIDEO	VIDEO	RIGHT	LEFT

Getting started

Yellow White

Red	Yellow
Audio/Video cable	White
	Red
(supplied)
S-video cable
(not supplied)

T V

IN

S-VIDEO

VIDEO

LEFT

AUDIO

RIGHT

Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.

•If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo audio output to monaural.

•If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the S-video cable (optional) in addition to the (standard) video connection to get better picture quality.

The unit is compatible with the PAL and NTSC systems, Set the VIDEO OUT SELECT switch on the rear panel to match the color system of your TV. Make sure that the color system of a DVD VIDEO/Video CD/SVCD disc labeled on the package matches your TV.

If you use a multi-system TV, you can play discs recorded on both PAL and NTSC systems by setting the VIDEO OUT SELECT switch appropriately. However, note that you must change the switch position while the unit power is off (on standby). Otherwise, the changed setting is not effective.

NOTE

•Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may cause a monitor problem when playing back a copy-protected disc.

13