JVC XV-S42SL manual To connect to an audio amplifier or receiver, Audio cable, Red Not supplied

Getting started

To connect to an audio amplifier or receiver

You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver.

English

English

English

The unit

DIGITAL OUT	VIDEO OUT
PCM / STREAM	COMPONENT			AV COMPU LINK
COAXIAL	Y	PB	PR
OPTICAL			VIDEO OUT
			SELECT
			NTSC	PAL
S-VIDEO	VIDEO	RIGHT	LEFT

Red White

White

Red

Audio cable (not supplied)

Amplifier or receiver

IN

LEFT

AUDIO

RIGHT

•Connect the unit's AUDIO OUT to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or receiver.

To connect to audio equipment with a digital input

You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks (OPTICAL or COAXIAL) to the digital input of an amplifier, MD, etc. by using an optional digital cable. The digital audio signal from a disc is directly transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an optional digital cable, you can enjoy high-quality surround sound.

When you make the digital connection, we recommend also to make the analog connection, because, depending on discs, no signal may be output from the DIGITAL OUT.

The unit

DIGITAL OUT		VIDEO OUT
PCM / STREAM		COMPONENT		AV COMPU LINK
COAXIAL	Y	PB	PR
OPTICAL				VIDEO OUT
				SELECT
				NTSC PAL
-VIDEO	VIDEO

Red	White	Optical digital cable
		(not supplied)
	Coaxial digital cable
	(not supplied)	Digital equipment
		White	IN	IN
				OPTICAL
			LEFT
			AUDIO	DIGITAL
	Audio cable		RIGHT	COAXIAL
		Red
	(not supplied)

Getting started

The OPTICAL jack is protected by the hinged cover. To connect the optical cable to the jack, press the cover with the plug and connect it to the jack inside in the correct direction.

NOTES

•When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the “DIGITAL AUDIO OUTPUT” setting in the “AUDIO” page of the preference display correctly according to the connected audio equipment. If the “DIGITAL AUDIO OUTPUT” is not set correctly, loud noise may be generated from speakers, causing damage to your speakers. See “DIGITAL AUDIO OUTPUT” on page 41.

•With the digital connection, the COMPRESSION settings in the AUDIO page of the preference display are invalid. Settings for these items must be made from the decoder.

15