Maintenance
To get the best performance of the system, keep your discs and mechanism clean.
General Notes
In general, you will have the best performance by keeping your discs, and the mechanism clean.
•Store discs in their cases, and keep them in cabinets or on shelves.
Handling Discs
• Remove the disc from its case by holding it at the edge while pressing the center hole lightly.
• Do not touch the shiny surface of the disc, or bend the disc.
• Put the disc back in its case after use to prevent warping.
• Be careful not to scratch the surface of the disc when placing it back in its case.
• Avoid exposure to direct sunlight, temperature extremes, and moisture.
Cleaning the system
•Stains on the system
Should be wiped off with a soft cloth. If the unit is heavily stained, wipe it with a cloth soaked in
•Since the unit may deteriorate in quality, become damaged or get its paint peeled off, be careful about the following.
—DO NOT wipe it with a hard cloth.
—DO NOT wipe it strong.
—DO NOT wipe it with thinner or benzine.
—DO NOT apply any volatile substance such as insecticides to it.
—DO NOT allow any rubber or plastic to remain in contact with it for a long time.
—DO NOT clean the moving panel when it is open.
To clean the disc
Wipe the disc with a soft cloth in a straight line from center to edge.
DO NOT use any
72
