Troubleshooting
Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVC service center.
| PROBLEM |
| POSSIBLE CAUSE |
|
| SOLUTION | |
| Power does not come on. |
| The power cord is not connected to an | Insert the plug into the socket. | |||
|
|
| AC outlet or the center unit. |
|
|
| |
|
|
|
|
|
| ||
| Power is not supplied to the |
| The power cord of the subwoofer is not | Press | on the center unit or AUDIO | ||
| powered subwoofer. |
| connected to an AC outlet. | on the remote control to turn off the | |||
|
|
|
|
| system, insert the plug firmly into an AC | ||
|
|
|
|
| outlet, and press | on the center unit | |
|
|
|
|
| or AUDIO | on the remote control | |
|
|
|
|
| again. |
|
|
|
|
|
|
|
| ||
|
|
| The system cable is not connected. | Connect the system cable. | |||
|
|
|
|
| |||
| The remote control does not |
| It is too far from the center unit, or is not | Come closer to the center unit. (Operate | |||
| work. |
| facing the center unit. | the remote control within 7 m from the | |||
|
|
|
|
| center unit.) |
| |
|
|
|
|
|
|
|
|
There is something obstructing the remote sensor.
The remote control is not aimed at the remote sensor on the center unit or components.
The remote control mode selector is set at an incorrect position.
Avoid any obstacles. (See page 19.)
Aim the remote control at the remote sensor on each equipment you want to operate.
Set it to the correct position.
General
The batteries are exhausted. |
| Replace the batteries. |
The batteries have been inserted the | Insert the batteries correctly. | |
wrong way round |
| |
|
|
|
The remote control is not set to operate the DVD player, tuner
For the DVD player, press DVD before you perform the operations.
For the tuner, press FM/AM before you perform the operations.
For using the sound setting buttons to adjust the output level of the speakers, press SOUND before you perform the operations.
| Sunlight is falling directly on the remote | Cover the remote sensor from direct | |
| sensor. | sunlight. | |
|
|
|
|
| The remote control signals are not set | Enter the correct manufacturer’s code. | |
| correctly. | (See pages 20, 71.) | |
|
|
| |
No sound. | The system cord and/or speaker cord is | Check the connection. | |
| not connected. |
| |
|
|
|
|
There is a short in the speaker cord.
The audio cord is not connected to AUX IN and/or DIGITAL IN correctly.
An incorrect source has been selected.
Muting is on.
The decode mode is not set correctly.
Reconnect the speaker cord.
Connect the cord correctly. (See page 14.)
Select the correct source. (See page 22.)
Press MUTING to cancel muting.
Select the proper decode mode. (See page 25.)
73