KMR 1250 DUser InstructionsEnglish
Typical applications
! Caution while sweeping!
Do not sweep up packing bands, wires or similar items, otherwise the sweeping mechanism will be damaged. Do not sweep any burning/glowing objects.
Sweeping on dry ground
If there is a large amount of rubbish, such as several layers of leaves
nremove the bulk by hand before you start with the
sweeper.
For a small amount of normal dirt n on an even surface:
lower main brush
– set the lever to the middle position (minimum brush wear).
n on an uneven surface: lower main brush
– set the lever to the lower position (increased brush wear).
nswitch on dust extraction
– set the switching mode lever to dry | . |
nfor cleaning right up to the edges – lower the side brush .
At regular intervals:
nclean the filter,
nempty the waste hopper.
Notes: If you are sweeping up fine dust, use the side brush as little as possible as it will increase the amount of dust stirred up by the sweeper. If the side brush encounters an obstacle, it automatically swivels back inside the outer contours of the sweeper. You should nevertheless try to avoid collisions.
While the sweeper is operating, the filter should be cleaned approx. every
Sweeping on damp or wet ground
Follow the same procedure as for sweeping on dry ground.
In order to protect the filter from moisture
nswitch off the dust extraction
– set the sweeping mode lever to wet | . |
At regular intervals:
nempty the waste hopper.
37