KMR 1250 D | User Instructions | English |
Troubleshooting
Problem | Possible cause | Remedy |
|
|
|
Engine does not start | Battery is flat | Recharge or replace battery |
|
|
|
| No fuel in tank | Fill up with petrol |
|
|
|
| Fuel tap is set to OFF | Open fuel tap |
|
|
|
| Seat contact switch not pressed | Sit down on the seat of the |
|
| sweeper |
|
|
|
Sweeper does not move | Lever (bypass valve) on converter | Push lever in opposite direction |
| transmission is open | to travel – see “Pushing the |
|
| sweeper by hand” |
|
|
|
Brushes do not rotate | Call Customer Service | |
|
|
|
| Check belt tension and adjust | |
|
| as required |
|
|
|
| Main brush or side brush has been | Remove blockage |
| jammed by packing bands or |
|
| similar item |
|
|
|
|
No dust extraction | Fan is not working | Check |
|
|
|
| Filter is blocked | Clean or replace filters |
|
|
|
Poor sweeping results | Brushes are worn down | Replace brushes |
|
|
|
| Waste hopper is full | Empty waste hopper |
|
|
|
| Incorrect sweeping pattern | Adjust sweeping pattern |
|
|
|
Dust is stirred up during | Worn out seals on sweeper, filter | Replace defective seals; fit filter |
sweeping | not fitted properly or defective | correctly or replace it |
|
|
|
Lifting mechanism for | Fuse has blown | Replace fuse or inform |
emptying hopper does not |
| Customer Service if fuse blows |
work |
| repeatedly |
|
|
|
| Defective switch | Inform Customer Service |
|
|
|
| Defective hydraulic unit | Inform Customer Service |
|
|
|
Sweeper travels forwards | Neutral position not set up | Inform Customer Service |
or backwards even though | correctly |
|
drive pedal is not pressed |
|
|
|
|
|
49
