PROGRAMMING RADIO PROGRAMS
Search for ADR- and DMX- programs
To locate new ADR- and
The automatic search is started if the receiver is
switched into standby using the 
key on the re- mote control handset.
In the process the receiver searches through the entire frequency range for new programs.
If any are found the receiver then saves these pro- grams.
When the search has finished the receiver finally switches into standby, and the
If you want to cancel the search, press the 
key on the remote control handset once again.
By means of the function sort (insert) you can sort the new ADR radio programs into the desired or- der.
The DMX programs will be sorted automatically according to the predefined program numbers.
If the search is terminated with the message "Memory full!", this indicates that the ADR program memory is completely occupied. In this case at least one program must be deleted via the ADR- setup menu and the search is then to be started again.
The automatic search can be turned off in the Ini- tial Setup Menu.
20
