DESCRIPTION OF KEYS ON REMOTE CONTROL HANDSET
1
This key switches the receiver into standby or
back into operation again. Caution: No supply isolation. Note!
If the receiver is switched into standby and the appropriate setting has been made in the initial setup menu, an automatic station search will be carried out for ADR- and
See also under "Search" in section "Program- ming".
2Numeric keys
In normal radio operation (program mode) you can use these keys to enter the program posi- tions. In setup mode the receive parameters can be adjusted.
3VOLUME
⇒Adjustment of volume, balance and tone control.
⇒The settings are effective only at the "AUDIO" connections and not at the "REC" connections, so as to avoid disturbance to recordings.
⇒
4MUTE
Muting of the sound.
The display indicates "Sound off".
While the sound is turned off, the volume at the
headset jack can be adjusted by means of the
volume keys.
The muting is only effective at the "AUDIO" connections. At the "REC" connections the muting has no effect, to avoid disturbance to recordings.
5DMX
⇒Changeover to DMX program mode.
⇒Invokes the DMX setup menu when used together with the MODE key. (Press the keys MODE and DMX in succession.)
6OK
Confirmation of entries, activation of menus in setup mode, scrolls through the Info data on the display
7BACK
⇒Quitting of menu windows without storing. Closing of menus.
⇒
8ADR
⇒Changeover to ADR program mode.
⇒Invokes the ADR setup menu when used together with the MODE key. (Press the keys MODE and ADR in succession.)
9RADIO
⇒Changeover to analog radio mode.
⇒Invokes the
10FAVORITE
⇒Changeover to favorite mode
⇒(Preferred programs)
⇒Invokes the FAVORITE menu when used together with MODE key. (Press the keys MODE and FAVORITE in succession.)
11
⇒Move through the program positions step-
⇒Inputting of receive parameters in setup mode
12MODE
By using the MODE key together a 2nd. key
you can call the following menus:
⇒ MODE + DMX | DMX setup menu |
⇒ MODE + ADR | ADR setup menu |
⇒MODE + RADIO
⇒ MODE + FAVORITE Favorite program assignment
⇒MODE + OK Program selection via cate- gories (in ADR/DMX mode)
⇒MODE + 0 Display of antenna signal level
⇒MODE + 1 Manual scrolling through Info data
⇒MODE + 2 Scroll Info data automatically
⇒MODE + 3 Display of title and artist
⇒MODE + 4 Display of title and author
⇒MODE + i Adjustment of scroll time and display of various Info data-
in scroll mode
13 i Info
Activation of the Help menu for the following information:
⇒Output of the unit's type
⇒Display of the required key functions for in- voking the individual menus.
12