Press MENU and the MENU screen displays.

1

Press c/d to select “Picture”.

2

Press a/b to select the desired menu item.

Press ENTER to proceed if necessary.

3

Press a/b or c/d to select the desired item

or adjust the item to the desired level. Press

ENTER if necessary.

4
NOTE
• For resetting all adjustment items to factory preset values,
pressa/b to select “Reset”, press ENTER, press c/d to
select “Yes”, and then press ENTER.
• Select “Advanced” and then press ENTER to set “Colour
Temp.”, “Fine Motion Advanced”, “Film Mode”, “Active
Contrast”, “3D-Y/C”, “Monochrome” or “Range of OPC”.
See page 35.
34

w OPC (Optical Picture Control) setting

You can set the TV to automatically adjust the screen

to suitable backlight brightness according to the

lighting conditions.

Using OPC on the remote control unit

NOTE
• Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.

Press OPC to switch the OPC function on and off.

Using OPC on the menu screen

Picture adjustment

You can adjust the picture to your preference.

Follow the steps to adjust the picture.

Watching TV
MENU [Picture]
Picture Audio
Contrast
OPC
DYNAMIC
[Off]
Brightness
Colour
Tint
Sharpness
Advanced
Reset
[+30]
[ 0]
[ 0]
[ 0]
[ 0]
Backlight [+14]
+
+
+
+
Manual picture settings
Selected item cbutton dbutton
OPC Sets whether or not the screen brightness
is automatically adjusted according to
the lighting condition in the room. (OPC
setting: See this page.)
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less brightness
For more brightness
Colour For less colour
intensity
For more colour
intensity
Tint Skin tones become
purplish
Skin tones become
greenish
Sharpness For less sharpness
For more sharpness
Advanced For fi ner picture adjustments. (See page
35).
Reset Resets all picture adjustment items to the
factory preset values.
Selected item Description
On: Display Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
On Automatically adjusts
Off The brightness is fi xed at the value set in
“Backlight” (See this page).
52D83X_en_e.indd 3452D83X_en_e.indd 34 2007/08/31 16:25:522007/08/31 16:25:52