Appendix
Mounting the TV on the wall
Removing the stand
For wall mounting with the optional bracket, remove the stand.
Before detaching/attaching the stand
•Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet.
•Remove all terminal covers and connected cables.
•Lay the TV down on cushioning (such as a blanket) over a table.
•Make sure two or more people perform the operation.
CAUTION
•Do not remove the stand from the TV unless using an
1 Hex key 
Unfasten | the stand in place. |
NOTE
• To attach the stand, perform the above steps in reverse order.
to mount it.
Stand post
1Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.)
2Remove the stand post from the stand base and attach it to the TV.
Handling and precautions with the wall-mounted TV
•You can mount the TV on the wall using the optional
•For details, refer to the instructions supplied with the optional bracket.
CAUTION
•This TV should be mounted on the wall only with the
•Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
Using an optional bracket to mount the TV
•You can ask a qualifi ed service personnel about using an optional
•Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
(See the bracket instructions for details.)
About setting the TV angle
| /15/20 | ° |
/10 |
| |
0/5 |
|
|
Vertical mounting | Angular mounting |
|
NOTE
•Detach the cable clamps on the rear of the TV when using the optional mount bracket.
70
52D83X_en_h.indd 70
2007/08/31 16:26:57
