On Off
Auto Power On
Selecting Recorder
Using Genre Info.
52
AQUOS LINK connection
First connect the AQUOS Audio speaker system or an AQUOS BD Player/AQUOS Recorder that supports the
HDMI CEC protocol.
NOTE
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, fi rst turn on the power of the TV with all relevant
device’s power turned on. Change the external input source by pressing TV/VIDEO, select the appropriate input source and
verify the audiovisual output.
• The cables illustrated in the following explanation are commercially available items.
AQUOS LINK
Connecting an AQUOS BD Player/AQUOS Recorder via
the AQUOS Audio speaker system
Connecting an AQUOS BD
Player/AQUOS Recorder only
Optical AUDIO
cable
HDMI cable
HDMI cable
HDMI cable
AQUOS BD Player/
AQUOS Recorder
AQUOS Audio
speaker system
AQUOS BD Player/
AQUOS Recorder
AQUOS LINK Setup
Press MENU and the MENU screen displays.
1
Press c/d to select “Option”.
2
Press a/b to select “AQUOS LINK Setup”,
and then press ENTER.
3

AQUOS LINK Auto power on

If this is activated, the One Touch Play function is enabled.
While the TV is in standby mode, it automatically turns on
and plays back the image from the HDMI source.
Press a/b to select “Auto Power On”, and
then press ENTER.
4
Press c/d to select “On”, and then press
ENTER.
5
Press MENU to exit.
6
NOTE
• The factory default for this item is “Off”.
52D83X_en_f.indd 5252D83X_en_f.indd 52 2007/08/31 16:26:142007/08/31 16:26:14