Controls & Displays

Remote control

1

2

3

4

5

6

7

8

9

0

-

=

~

!

3

1

OPEN/CLOSE – Disc tray open/close –

 

page 16

2

VIDEO ON/OFF – press to turn video

 

output off and on

@

• HDMI video output cannot be switched off.

#3 DISPLAY page 25

$4 ZOOM page 24

%5 VIDEO ADJ. – Video adjust (pages 28–29)

^6 Number buttons

&7 CLEAR page 26

8 ANGLE page 23

*9 8 (PAUSE) page 16

10 4 (PREV.)/¢ (NEXT)– Skip – page 16

(

• Allows you to search forward/backward through

)

a disc. Use to skip the title, chapter or track.

 

_11 TOP MENU page 17

12 1 (REV)/¡ (FF) – Scan – page 16

+13 Cursor (2/3/5/) / ENTER button pages 17, 31

¡14 RETURN page 17

15POWER – switches the player on or into

standby

16DIMMER – Press to change the display brightness – page 13

17RANDOM pages 21, 27

£18 PAGE page 21

19 PROGRAM page 26

20 SEARCH page 18

21 REPEAT page 22

A–B page 22

22 S.MODE page 23

23 SUBTITLE page 23

24 AUDIO page 24

25 3 (PLAY) page 16

26 7 (STOP) page 16

27 MENU page 17

28 SETUP page 31

Note

English

• The +10 button is not used on this set.

This remote control supports two remote control codes: DVD1 and DVD2.

When the unit is shipped from the factory, the remote control is set to DVD1.

To set the remote control to DVD2, hold down both 7 (STOP) button and 2 number button on the remote control for at least five seconds. (If the batteries in the remote control are replaced while the remote control is set to DVD2, the setting will revert to DVD1.)

To set the remote control back to DVD1, hold down both 7 (STOP) button and the 1 number button on the remote control for at least five seconds.

To check which remote control code is set at any time, hold down both the Stop and Pause buttons; the current setting (either “DVD1” or “DVD2”) will be displayed in the display window on the main unit.

Also set the REMOT CODE on the FL menu to the same setting as the remote control. (This setting is set to DVD1 when the unit is shipped from the factory.) (see page 30)

15

Page 15
Image 15
Marantz DV7600 Remote control, Video ON/OFF press to turn video, Output off and on, +10 button is not used on this set