2
Connecting Up
Easy setup
This easy setup is the minimum set of connections you need to start watching
Important
•Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet.
•When connecting the component is turned on, do not unplug the power cord of this DVD player from the wall outlet. The speaker may be damaged.
2 Connect to a pair of stereo | 1 Connect to a composite video | |||||||||
|
| audio inputs on your TV using | input on your TV using the | |||||||
|
| the supplied Audio/Video cable. | supplied Audio/Video cable. | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
See Note: |
|
|
|
|
| 3 | Plug into a standard | |
EXT. INT. |
| |||||||
|
| |||||||
Remote Switch |
|
|
|
|
| Control terminal for use |
| AC wall outlet. |
|
|
|
| |||||
|
|
|
|
| by custom installers. |
|
| |
|
|
|
|
|
|
|
| |
10
Connecting audio/video cables
Be sure to insert each plug fully for the best connection. The plugs and jacks are
Connecting system control cables
By connecting this DVD player to another Marantz audio component using a supplied System control cable, you can remotely operate the components as a single system.
•When connecting to component with a remote sensor, be sure to connect the REMOTE CONTROL IN jack of this DVD player to the REMOTE CONTROL OUT jack of the compo- nent with the remote sensor.
•When connecting to component which is not equipped with a remote sensor, be sure to connect the component to the REMOTE CONTROL OUT jack of this DVD player.
Note
•When connecting to a standard TV, select 4:3 L - Box or 4:3 Pan Scan in the TV Aspect setting (see page 33).
•Connect the video output of the player directly to your TV. Because the player is designed to support an Analog Protection System copy card, there are cases when proper playback will be not be possible if the player is connected to the TV through a VCR and images are recorded and played on the VCR.
•The player’s video output and S2 output will not be progressive.
•Remote switch
When using this DVD player independently, set this switch to INT. (INTERNAL). When using this DVD player in a system with a Marantz receiver equipped with a remote sensor, set the switch to EXT. (EXTERNAL).
