5Playing Discs
29
English
Creating your own setting1Press the VIDEO ADJ. button on the re-
mote control.
2Select “Setup”
and then press ENTER.
Memory Select Standard
Setup
Video Adjustment
3Use the cursor buttons
(
2
/
3
)
to select a
Memory (Memory 1, 2, 3) to change/store
a picture quality parameter.
Video Adjustment
sharp
Sharpness High
sharp
Sharpness Mid
sharp
Detail
Memory 1
Progressive Motion Auto 1
max
Move : Enter
Recall Settings
DNR
max
CNR
soft
soft
soft
min
min
max
Brightness
min
4Use the cursor buttons
(
5
/
∞
)
to select a
picture quality parameter, then use the
cursor buttons
(
2
/
3
)
to adjust that
parameter.
Video Adjustment
red
Hue
Black Setup 0.0 IRE
Off
Chroma
Delay
+
+
-
-
green
min
min
Initialize
Gamma
max
max
Move : Enter
Contrast
Chroma Level
•Progressive Motion – When using progressive
scan, this adjusts the motion and still picture
quality. There are two modes: Auto and Video.
In Auto mode, the player automatically distin-
guishes film-source material and video-source
material. Set to the Video mode when you know
the program you are watching is from video-
source material (such as animations).
Auto 1: Standard setting
Auto 2: Setting for moving images
Auto 3: Setting for still images
Video 1: Standard setting
Video 2: Setting for moving images
Video 3: Setting for still images
•DNR – Adjusts the amount of noise reduction
(NR) applied to the Y (brightness) component
•CNR – Adjusts the amount of noise reduction
(NR) applied to the C (color) component
•Sharpness High – Adjusts the sharpness of the
high-frequency (finely detailed) elements in the
picture
•Sharpness Mid – Adjusts the sharpness of the
mid-frequency (less detailed) elements in the
picture
•Detail – Adjusts how sharp edges appear in the
picture
•Brightness – Adjusts the image brightness
•Contrast – Adjusts the image contrast
•Chroma Level – Adjusts how saturated colors
appear
•Hue – Adjusts the overall color balance
between red and green
•Chroma Delay – Compensates for misalign-
ment of the Y (brightness) and the C (color)
components
•Gamma – Adjusts the brightness of the darker
images in the picture
•Black Setup – Corrects floating black color
•Initialize – Returns to the default values
5Press ENTER to save your changes.
Note
•Pressing DISPLAY while the VIDEO ADJUST-
MENT screen is displayed shows one adjust-
ment item, as given below, so that you can
adjust the item while confirming its effect.
Pressing DISPLAY again returns to the former
setting.
•Chroma Delay will not operate in Composite
Video out, S2 Video out and COMPONENT
Video out when Interlace is selected.