Kathrein UFE 305/S manual Adjusting the LNB

Installation menu

Adjusting the LNB

In this menu, you can configure your receiver for your antenna:

-Select LNB type (standard-programming for universal LNBs)

-LNB supply voltage

-DiSEqC™ switch V1.0

-DiSEqC™ entry

-Repeat DiSEqC™: If the receiver is operated on a reception installation with one or more cascaded DiSEqC™ switching matrix (matrices), the DiSEqC™ command must be repeated. In this case, switch to '1' or '2' in menu item 'repeat DiSEqC™'

-22 kHz switch: In this menu item, you can determine whether the 22 kHz signal is to be used to switch between the high and low band of a satellite or between two satellite positions.

The receiver is pre-programmed and delivered with an installation menu which is protected with the password '0000'.

20