Installation menu
OSD setting (menu display)
Selection of the individual display parameters:
Setting the time (clock parameters)
The time and date must be programmed, so that the receiver shows the correct data in the information messages or when you use the timer for recordings, and in standby mode on the display on the front panel.
The clock can be set as follows:
a)The time of day transmitted by the satellite can be used (default setting). However, the time difference between GMT and local time must be taken into consideration (Germany + 2 hrs. in summer, + 1 hr. in winter).
b)If you select 'Off' in the first field, you have to enter the time and date manually.
26
