Kathrein UFE 305/S manual Operation, Programme selection

Operation

Programme selection

The receiver is factory pre-programmed with most of the common satellites. In order to be able to receive properly, of course, you should have aligned the antenna onto at least one of these satellites.

Press SEL in order to call up the list of the pre-programmed satellites.

Select a satellite, and press OK. The receiver now shows all the programmes transmitted over this satellite.

There is no printed programme list included in the scope of delivery.

	Select the desired programme using the / keys, and press OK.
Note:	Alternatively, you can call up the programme list of a satellite by
	pressing OK immediately.
	To choose a programme, enter its position using the number keys on
	the remote control.
	Press TV/R to change from the TV programme list to the radio
	programme list, press FAV to call up a favourite list.
	(4 lists).
	Swap through these lists using either the Quality/P key, the Recall/P+
	key or the / keys. Press EXIT so that the lists disappear.

10