Search adjusting a channel, Programme search

Search (adjusting a channel)

	Programme search:
Note:	The receiver indicates not only the reception strength and quality,
	but also provides an auxiliary function (sound signal) to align the
	antenna. In menu item 'search', you can activate this auxiliary
	function with the mute key.
	You can delete a transponder using the red key 'delete TP'. Start the
	programme search over the entire satellite with the blue key, start the
	search for a specific transponder with the green key.
	The receiver prompts you to confirm that you want to delete/remove
	the existing programmes. If you confirm this with 'Yes', all the
	programmes assigned to this satellite or transponder will be
	deleted/removed, the new assignment will be entered in the main list.
	However, if you enter 'EXIT' instead of 'Yes', the search will not be
	started.
	PID entry (Programm Identification):
	Press the yellow key, enter both the video and audio PIDs, then press
	the yellow key again. The programme, named 'TV CH', will be placed
	on the end of the main list.

Although the receiver is pre-programmed, it may be necessary to update the programme list, add further transponders, or to program other satellites.