Page
17
5) EFFECTS/REVERB
When selecting some preset sounds, the LED indicator for the EFFECTS or REVERB buttons may turn on automatically. This is because certain preset sounds are prepared with an effect enabled as their default setting. Adding an effect to the sound enhances tonal quality and improves acoustic realism. This CN piano features two separate groups of effects. The first is reverb and the second contains chorus, delay, tremolo and rotary speaker.
ADDING REVERB
¡REVERB
Reverb adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert hall. There are fi ve types of reverb available: Room 1, Room 2, Stage, Hall 1 and Hall 2.
Step1
Press the REVERB button.
The LED indicator will turn on to indicate that reverb is in use. Press and hold the REVERB button to show the currently selected reverb type in the display.
Step2
To change the reverb type, use the VALUE buttons while holding down the REVERB button.
Room 1 | Room 2 | Stage | Hall 1 |
|
|
|
|
|
|
|
|
Hall 2
Hold down the button.
To turn off the reverb, press the REVERB button again.
Press the REVERB button once again to turn the reverb back on. The previously selected reverb type will be used.
Any changes made to the reverb type or on / off status will remain until the power is turned off. When the power is turned off the reverb settings will return to the default settings.
PLAYING THE PIANO
2
