Start to play the piano, ‘ Recording a Second Part | Kawai CN31

Page

32

4	RECORDER

Step2

Start to play the piano.

The recorder will automatically start recording with the ﬁ rst note played.

During this time, the LED indicators for the REC and PLAY/STOP buttons will be turned on. Any changes made to the sound while recording will also be recorded.

The recording can be started by pressing the PLAY/STOP button instead of pressing a key, allowing a blank bar to be inserted at the beginning of a song.

Step3

Press the PLAY/STOP button to stop recording.

The LED indicators for the PLAY/STOP button and the REC button will turn off and the newly recorded part will be saved to memory automatically.

Saving may take a few moments and during this time the piano will not perform any other operations.

To record the piece again, simply repeat the above procedure. The new recording will completely erase the previous one.

RECORDING A SECOND PART

A second part can be recorded in the second track of the same song. After recording the ﬁ rst part, select the other track and record the second part.

Step1

Press and hold the REC button again and press the BASS button to select to record PART2.

		2	1
	Select part 2.		Hold down the REC button.

The LED indicators for the SONG1 button and PART2 button will start to ﬂ ash, indicating that they are selected

for recording.

Furthermore, the LED indicator for the PART1 button will now be turned on, indicating that PART1 has already

been recorded.

Image 32

Kawai CN31 manual Start to play the piano, Press the PLAY/STOP button to stop recording, ‘ Recording a Second Part

Contents

Piano Playing Function Lesson Page Table of Contents Important Safety Instructions If you are going to use an AC power cord Conforms to the specified power voltageFailure to do so may result in fire Doing so may cause electric shock Product and other devices Product is handled incorrectlyFailure to do so may cause breakdown of this Instruction for AC power cord U.K ‘ Front Panel ‘ Pedals ‘ Headphones Press the Power Switch to turn on the power Adjust the volume level using the Master Volume slider‘ Setting UP the Piano Basic Operations Press the Concert Magic and Lesson buttons simultaneously ‘ Demo Songs Play the keyboard ‘ Selecting a Preset Sound„ Preset Sounds Dual Two different sounds will be heard at the same time Step Split Press the Split button Press the Split button to exit the split mode LED indicator for the Split button will turn off ‘FOUR HANDS’ Mode ‘ Entering ‘FOUR HANDS’ Mode‘ Exiting ‘FOUR HANDS’ Mode To exit ‘Four Hands’ Mode, press the Split button again EFFECTS/REVERB Press the Reverb button‘ Adding Reverb ¡ Reverb Press the Effects button ‘ Adding Other Effects Selecting the Touch Sensitivity Transposing the Piano Playing with Concert Magic To listen, press the Play Stop button‘ Selecting a Song ‘ Listening to the Song ‘ Concert Magic Part Volume Balance ‘ Performing a Song ‘ Concert Magic Song Arrangement Types „ Easy Beat„ Melody Play „ Skillful Press and hold the Concert Magic button Start by tapping any key with a constant steady beat‘ Steady Beat ‘ Concert Magic Demo Modes ‘ Concert Magic Playback Speed Tempo value will be shown in the display Metronome Press the Tempo buttonPress the Tempo button again to stop the metronome Press the Beat button ‘ Adjusting the Metronome Volume Volume level of the metronome can also be adjustedPress the Beat button again to stop the metronome Press the Tempo and Beat buttons simultaneously Selecting a BOOK/SONG Press the Lesson button ‘ Adjusting the Tempo of a Song Listening to and Playing a SongPress the PLAY/STOP button to play the selected song ‘ Exiting the Lesson Function Recording a Song Practice Press the REC button while the Lesson button is litPress the PLAY/STOP button to listen to the recording ‘ Playing Back the Recording Recording REC Button If no Part is selected PART1 will be selected automatically ‘ Recording a Second Part Start to play the pianoPress the PLAY/STOP button to stop recording Press the PLAY/STOP button to ﬁ nish recording Playing Back a Song ‘ Playing Back Recorded Parts Separately LED indicators will display which songs have been recorded LED indicator of the selected song will start to ﬂ ashErasing a Song Hold down the REC and PLAY/STOP buttons ‘ Entering a Function Mode ‘ Exiting a Function Mode Tuning Use the Value buttons to raise or lower the pitch Temperament Brief Explanation of Temperaments Use the Value buttons to change the type of temperament ‘ KEY Signature of Temperament ‘ Midi Overview Channel number can be set from 1 to Midi ChannelUse the Value buttons to change the channel number Transmit Program Change ON/OFF Offon Local Control ON/OFF Use the Value buttons to toggle local control on and off MULTI-TIMBRAL Mode ON/OFF Channel Mute Use the Value buttons to toggle channel mute on and off Sending Program Change Numbers Use the Value buttons to change the program change number Lower Octave Shift Lower Octave Shift can be set from 0 to Lower Pedal ON/OFF Use the Value buttons to toggle lower pedal on and off ‘ Connecting to Other Devices „ Parts Provided ‘ Assembly Instructions„ Assembly Sequence 7 y ‘ Specifications ‘ Midi Exclusive Data Format 10 F7 ‘ Midi Implementation Chart Function Transmit Receive RemarksPage Page OW1004E-S0701