First press the desired SOUND SELECT button to select the upper sound. Then, while holding down the SPLIT button, press the desired SOUND SELECT button to select the lower sound. The

LED Indicator for the upper sound will be turned on and the LED for the lower sound will start flashing.

Studio Grand /Jazz Organ

The LCD Display shows you which sounds are selected for the upper and lower sections.

CHANGING THE SPLIT POINT

The default split point is set between B2 and C3. This point can be moved to anywhere on the keyboard.

Press the desired key while holding down the SPLIT button.

SplitPoint=C2

The LCD Display shows you which key you pressed

The key you pressed becomes the lowermost note for the upper section.

2.4BALANCE SLIDER

You can adjust the volume balance between the two sounds in Dual or Split mode. Use the BALANCE slider to adjust the balance. Move the slider to the right to increase the volume of the sound shown on the top line of the display and decrease the volume of the sound shown on the bottom line of the display. The balance changes in the opposite way when the slider is moved to the left.

2.5EFFECTS/REVERB

You might have noticed that when you select some of the preset sounds, the LED indicator for the EFFECTS or the REVERB is turned on. The reason for this is some of the preset sounds are set up with an effect on as their initial setting.

Adding an effect to the sound enhances tonal quality and improves acoustical realism. The CN piano is provided with two separate groups of effects. The first is reverb and the second contains chorus, flanger, delay, tremolo and rotary speaker.

REVERB

Reverb adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert hall. There are six types of reverb available. They are Room 1&2, Stage, Hall 1&2 and Plate.

10

KAWAI DIGITAL PIANO CN4

Page 14
Image 14
Kawai CN4 manual Changing the Split Point, Balance Slider, Effects/Reverb, Studio Grand /Jazz Organ