![](/images/new-backgrounds/1247348/24734813x1.webp)
8. Insert the pedal connection cord that comes from Pedal Board
(C) into the piano’s pedal jack and fasten with cord clamps.
(H)
Bottom View
9.Turn the adjuster (installed on the bottom of the Pedal Unit)
down until it makes firm contact with the floor. If the floor is carpeted, place a spiked furniture cup under the adjuster so that it makes firm contact with the carpet backing. Press any pedal with your foot. If the pedal rail flexes, lower the adjuster until flexing is minimized.
CAUTION:
Before moving your piano, turn the adjuster up so that it clears the floor.
ATTACHING THE HEADPHONE HOOK (OPTION)
1.Fix the headphone hook to the bottom of the piano with two screws packed in the same plastic bag.
Headphone Hook
Headphone Jacks
Screws
M4 x 12
INTRODUCTION | 3 |