THANK YOU FOR PURCHASING A KAWAI DIGITAL PIANO!
The Kawai digital piano is a revolutionary new keyboard instrument that combines the latest in electronic advances with traditional craftsmanship inherited from Kawai’s many years of experience in building fine pianos. Its keyboard provides the touch response and full dynamic range required for a superb performance on the piano, harpsichord, organ, and other instruments. In addition, the CN piano is equipped with reverb and a digital effect processor for an even fuller sound.
This Owner’s Manual contains valuable information that will help you make full use of this instrument’s many capabilities. Please read all sections carefully and keep this manual handy for further reference.
READ ME FIRST
Before beginning the assembly of your CN4 read and become familiar with the assembly instructions that follow. Then, carefully unpack the piano and check your unit against the parts list.
PARTS PROVIDED |
|
|
|
|
|
| |
Side Panel (A) | 2 pcs. | M6 x 25 | ø4 x 16 | ø4 x 25 | Adjuster | Cord Clamp | |
Back Board (B) | 1 pc. | ||||||
|
|
|
|
| |||
Pedal Board (C) | 1 pc. |
|
|
|
|
| |
Screw (D) (M6 x 25) | 4 pcs. |
|
|
|
|
| |
Screw (E) (ø4 x 16) | 6 pcs. |
|
|
|
|
| |
Screw (F) (ø4 x 25) | 2 pcs. |
|
|
|
|
| |
Adjuster (G) | 1 pc. | (D) | (E) | (F) | (G) | (H) | |
Cord Clamp (H) | 1 pc. | ||||||
|
|
|
|
| |||
Headphone Hook | 1 pc. |
|
|
|
|
|
1. Insert the Adjuster (G) on the Pedal Unit.
(A) |
|
|
| (a) | 2. Untie the pedal cable on the bottom of the |
| Pedal Board (C). | |
(C) |
| |
|
| |
| (E) | 3. Slide the metal bracket located at the end of |
|
| |
|
| Pedal Board (C) on to screws (a) and (b) of Side |
(b)Panel (A). Install tighten screw (E) then tighten screws (a) and (b). Repeat this procedure on the other end of the Pedal Board, then raise the completed stand assembly.
INTRODUCTION | 1 |