Bushing | Rear Wheel Driver |
(Barrel Side Down) | (Pegged Side Down) |
Slots Up |
|
| Wheel (L) |
| (Indented Side Down) |
Motor Assembly
Wheel (R)
(Flat Side First)
Bushing
Wheel Cover (Ring End First)
Wheel Cover
(Indented Side Down)
2
Washer
(Indented Side Out)
4 |
| Rear Wheel Driver |
Washer | (Pegged Side Out) |
• Slide a rear wheel driver, pegged side out, onto the rear axle. | |
| Make sure the rear wheel driver fits into the pins in the motor |
| assembly inside the vehicle. |
• | Slide a bushing, ring end first, onto the rear axle. |
• | Locate a wheel marked R. Slide the wheel, flat side first, onto the |
•Slide a 7/16" washer onto the rear axle.
•Slide a wheel cover, indented side down, onto the rear axle.
•Locate a wheel marked L. Slide the wheel, indented side down, onto the rear axle.
•Slide a bushing, barrel side down, onto the rear axle.
•Slide a rear wheel driver, pegged side down, onto the rear axle. Fit the pegs on the rear wheel driver into the slots in the wheel.
Motor Assembly
Rear Axle Assembly
3 BOTTOM VIEW
•Position the vehicle upside down.
•Slide the rear axle assembly through the hole in the back end of the vehicle, as shown. Make sure the rear wheel driver fits into the pins in the motor assembly inside the vehicle.
| rear axle. Make sure the pegs on the rear wheel driver fit into the |
| slots in the wheel. |
• | Slide a wheel cover, indented side out, onto the rear axle. |
• | Slide a 7/16" washer onto the rear axle. |
Cotter Pin
Rear Axle
5
• Fit a cotter pin into the hole in the rear axle.
9 |